Tony is a Geek

Okay, so you may have noticed that recently, I made a 3D Avatar / Digital Human using the Unity 3D engine and connected it up to the IBM Watson SDK . Well, straight after doing that piece of work, I thought...hmmm... I also have the Unreal Engine installed on my laptop too, I wonder if there is an IBM Watson SDK sample app that could use that engine to do what I did above... A quick DuckDuckGo search later and yep, here is a gitHub . A quick 50,000ft difference check is - what are you more comfortable writing your code in? C# from Microsoft (Unity) or C/C++ (Unreal Engine) What have you had more experience in using? So, why am I pointing this out?  Well, I happened to stumble over a Digital Human that is created and controlled by the Unreal Engine....and well, it's pretty awesome! My Unity / "couple of days" effort project versus this (probably) quite a few £££££ effort doesn't really compare - but what it does show is that this level of technology and ef

most certainly not a "new" idea, but I eventually got around to putting this together: https://learn.adafruit.com/mini-raspberry-pi-handheld-notebook-palmtop?view=all I 3D printed out the parts, takes about 6-8hours in total.  I already had one of these bluetooth keyboards knocking around from way-back-when, it's kinda cool as it has a little mouse pad on the right hand side and if you set up the Pi properly, it picks it up on boot-up and "just works". I have a 3.5" touchscreen and an RPi3, albeit not the same screen as shown in the article, (but I'll come back to that later).  I already had a battery power battery from another project that didn't go anywhere, so it seemed like a good idea to throw all these parts together and make this. The one gotcha I currently have is related to the hinge screws/nut things, I don't have what is needed - I've gone through every "box of bits" I have - what I did find was 2 pop-rivets